Findings
1Equipment and facility
Your firm failed to use equipment in the manufacture, processing, packing, or holding of drug products that is of appropriate design, adequate size, and suitably located to facilitate operations for its intended use and for its cleaning and maintenance (21 CFR 211.63). Your firm uses purified water as a component to manufacture your OTC drug product. The (b)(4) water system was not designed and maintained appropriately for its intended use. For example, your non-circulating…
2Material and supplier control
Your firm failed to test samples of each component for identity and conformity with all appropriate written specifications for purity, strength, and quality. Your firm also failed to validate and establish the reliability of your component supplier’s test analyses at appropriate intervals (21 CFR 211.84(d)(1) and 211.84(d)(2)). You manufacture a topical over-the-counter (OTC) drug product for the U.S. market. You failed to adequately test your incoming components, including…
3Laboratory and QC controls
Your firm failed to establish laboratory controls that include scientifically sound and appropriate specifications, standards, sampling plans, and test procedures designed to assure that components, drug product containers, closures, in-process materials, labeling, and drug products conform to appropriate standards of identity, strength, quality, and purity (21 CFR 211.160(b)). Your firm failed to demonstrate that your chemical and microbiological test methods were…
About this record
Extracted automatically from the document US FDA published on 2024-11-12. The source is available at the link above.
This is a record of that moment. Inspection findings are usually followed by the company's response and corrective action, but this page does not know how that turned out. Do not read it as the current state; check the regulator's official announcements for the latest status.
Translation and classification are automated and may differ in nuance from the source.
