Inspection Record

Triangle Compounding Pharmacy Inc — FDA 483 Findings

US FDAInspected 2017-10-02Published 2024-01-17 10 findingsDeviation, CAPA, and investigationEquipment and facilityAseptic processing and sterility assuranceQuality unit oversightContamination controlOther quality systemLaboratory and QC controlsMaterial and supplier control

Inspectors Rachael L Cook · Seneca D Toms · Adam R CookeThe inspectors who signed the published document.Inspector lookup

View the regulator's official source The source document is always the basis for judgement.

Findings

1Deviation, CAPA, and investigation

There is a failure to thoroughly review any unexplained discrepancy whether or not the batch has been already distributed.

2Equipment and facility

Equipment and utensils are not maintained at appropriate intervals to prevent malfunctions and contamination that would alter the safety, identity, strength, quality or purity of the drug product.

3Aseptic processing and sterility assurance

Procedures designed to prevent microbiological contamination of drug products purporting to be sterile are not established and followed.

4Quality unit oversight

The responsibilities and procedures applicable to the quality control unit are not fully followed.

5Aseptic processing and sterility assurance

Aseptic processing areas are deficient regarding the system for cleaning and disinfecting the equipment to produce aseptic conditions.

6Contamination control

Container closure systems do not provide adequate protection against foreseeable external factors in storage and use that can cause deterioration or contamination of the drug product.

7Aseptic processing and sterility assurance

Aseptic processing areas are deficient regarding the system for monitoring environmental conditions.

8Other quality system

Filled drug product containers which are set aside and held in an unlabeled condition are not identified and handled to preclude mislabeling of individual containers, lots or portions of lots.

9Laboratory and QC controls

Testing and release of drug product for distribution do not include appropriate laboratory determination of satisfactory conformance to the final specifications prior to release.

10Material and supplier control

Failure to reject any lot of components that did not meet the appropriate written specifications for identity, strength, quality, and purity.

About this record

Extracted automatically from the document US FDA published on 2024-01-17. The source is available at the link above.

This is a record of that moment. Inspection findings are usually followed by the company's response and corrective action, but this page does not know how that turned out. Do not read it as the current state; check the regulator's official announcements for the latest status.

Translation and classification are automated and may differ in nuance from the source.

Triangle Compounding Pharmacy Inc company profile — full history US FDA documents, 2024 Go to Findings search