Findings
1Material and supplier control
Your firm failed to conduct at least one test to verify the identity of each component of a drug product. Your firm also failed to validate and establish the reliability of your component supplier’s test analyses at appropriate intervals (21 CFR 211.84(d)(1) and 211.84(d)(2)). Based on the records and information you provided, you did not demonstrate that you are testing the identity of incoming components used in the manufacture of your drug products. Additionally, you are…
2Stability and storage
Your firm failed to establish and follow an adequate written testing program designed to assess the stability characteristics of drug products and to use results of stability testing to determine appropriate storage conditions and expiration dates (21 CFR 211.166(a)). Based on the records and information you provided for stability, you lack an adequate stability testing program and supporting data to show that the chemical properties of your drug products remain acceptable…
3Laboratory and QC controls
Your firm failed to have, for each batch of drug product, appropriate laboratory determination of satisfactory conformance to final specifications for the drug product, including the identity and strength of each active ingredient, prior to release, and for each batch of drug product required to be free of objectionable microorganisms, appropriate laboratory testing, as necessary (21 CFR 211.165(a) and 211.165(b)). Based on the records and information you provided, you did…
About this record
Extracted automatically from the document US FDA published on 2023-11-14. The source is available at the link above.
This is a record of that moment. Inspection findings are usually followed by the company's response and corrective action, but this page does not know how that turned out. Do not read it as the current state; check the regulator's official announcements for the latest status.
Translation and classification are automated and may differ in nuance from the source.
