1Other quality system
The handling of standard operating procedures for good manufacturing practices was inadequate.
Inspection Record
Menasha Packaging Canada L.P. — Health Canada Inspection Findings
View the regulator's official source The source document is always the basis for judgement.
Findings
2Stability and storage
The temperature and/or humidity control was inadequate.
3Deviation, CAPA, and investigation
Investigations into deviations, reports, and/or follow-up actions were inadequate. The change control system was inadequate for ensuring changes are properly documented, evaluated, and/or approved.
4Other quality system
The electronic system was not validated for its intended use.
5Material and supplier control
The handling of raw materials, products, or packaging materials in keeping with pre-approved written procedures or instructions was inadequate.
About this record
Extracted automatically from the document of the Health Canada inspection on 2025-09-24. The source is available at the link above.
This is a record of that moment. Inspection findings are usually followed by the company's response and corrective action, but this page does not know how that turned out. Do not read it as the current state; check the regulator's official announcements for the latest status.
Translation and classification are automated and may differ in nuance from the source.
