본문 바로가기

EU · EudraLex Vol.4

EU GMP Annex 1 8.101

8. Production and Specific Technologies › Form-Fill-Seal (FFS)

조항 원문

Critical process parameters for FFS should be determined during equipment qualification and should include, but are not limited to:

i. Settings for uniform package dimensions and cutting in accordance with validated parameters.

ii. Setting, maintenance and monitoring of validated forming temperatures (including pre-heating and cooling), forming times and pressures as relevant.

iii. Setting, maintenance and monitoring of validated sealing temperatures, sealing temperature uniformity across the seal, sealing times and pressures as relevant.

iv. Environmental and product temperature.

v. Batch-specific testing of package seal strength and uniformity.

vi. Settings for correct filling volumes, speeds and uniformity.

vii. Settings for any additional printing (batch coding), embossing or debossing to ensure that unit integrity is not compromised.

viii. Methods and parameters for integrity testing of filled containers (see paragraph 8.22).

본문은 원문(영어)입니다. 국문 번역은 준비 중입니다.

출처: European Commission, DG SANTE · © European Union. Reuse is authorised provided the source is acknowledged (Commission Decision 2011/833/EU on the reuse of Commission documents). · 수집일 2026-11-15

Weekly Newsletter

이런 지적, 매주 월요일 한국어로 받아보세요

FDA·EMA·식약처의 새 지적과 조치를 공식 원문 링크와 함께 보내드립니다. 사이트에 새로운 기능이 생기면 함께 안내드립니다. 구독은 언제든 한 번의 클릭으로 해지할 수 있습니다.

이번 주 소식 먼저 보기

매주 월요일 발송 · 구독 신청 시 확인 메일이 발송됩니다 · 수신거부는 모든 메일 하단에서 가능합니다.